MediaMark Online Shop

Tieline Codec Solutions (Used)
0.00 -0.0 USD
Dimensions: 8.5” x 5.9” x 1.75” (216mm x 150mm x 44mm)
Power: 12V DC, 400mA
Operating temp: 0°C to 50°C (32°F to 122°F)
Humidity: 20% ≤RH ≤70% (0 to 35°C), non-condensing
IP (Compressed): Opus, Tieline Music, Tieline MusicPLUS, G.711, G.722, MPEG Layer 2, AAC-LD, AAC-ELD, AAC-LC, AAC-HE, AAC-HEv2, 16/24 bit Enhanced apt-X*
IP (uncompressed): Linear PCM16
Digidesign Amplifier (Used)
170.00 170.00 170.0 USD
Firewire connectivity.
Eight analogue inputs and eight analogue outputs, all balanced.
Inputs 1-4 have mic preamps with 48V phantom power, switchable in pairs.
Eight channels of ADAT optical I/O or two channels of S/PDIF I/O.
MIDI In and two MIDI Outs.
A-D and D-A: 24-bit at 44.1, 48, 88.2 and 96 kHz sample rates.
Outputs 1 and 2 mirrored on quarter-inch TRS monitor outputs and RCA outputs.
Alternate Source input on RCA connectors for monitoring tape players, CDs and so on.
Maximum input levels: mic +3dBu, line +18dBu.
I/O frequency response: +0.15/-0.5 dB, 20Hz-20 kHz.
Input dynamic range: 101dB A-weighted on inputs 1-4; 108dB A-weighted on inputs 5-8.
Output dynamic range: main outputs 114dB, Monitor outputs 112dB, outputs 3-8 114dB, Alt outputs 98dB (all A-weighted).
DENON Stereo Double Cassette Tape Deck (Used)
130.00 130.00 130.0 USD
Chrome Tape Capabılity
Normal Tape Capabılity
Metal Tape Capabılity Stereo Head Configuration
4 Track / 2 Channel Connectivity
AC Power Cord / Plug
RCA Input/output Connectors
Orientation Left / Right
Noise Reduction
Dolby-B Noise Reduction
Auto Shutoff
4-Digıt Digital Counter
150.00 150.00 150.0 USD
dbx® 286s Channel Strip Processor (Used)
0.00 -0.0 USD
The dbx® 286s is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. It has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. The patented dbx OverEasy® compressor will transparently smooth out uneven acoustic tracks.
Full complement of meters and status LEDs
+48V Phantom Power
Precision detented controls
Studio quality Mic Preamp/Channel Strip Processor
Classic dbx Compression puts great sound within easy reach
Frequency tunable De-Esser reduces sibilance and high frequency distortion
Enhancer increases the detail and definition of the high and low frequencies
Program adaptive Expander/Gate
Insert jack allows you to add an external processor
1.00 1.00 1.0 USD
Glensound HD Voice Broadcasters' Mobile Phones make it possible to use the 3G UMTS network as an audio link, with a bandwidth of up to 7 kHz, for broadcast applications. The increased bandwidth is more suitable for live reporting applications as well as higher-quality IFB and talk back applications. Should a 3G network not be available, they will also act as a normal quad-band 2G GSM phone. They have balanced, line-level connections, with XLR connectors, for ease of interfacing to broadcast mixers, recorders, or computers. The portable version also has a dynamic microphone input. The phones connect as a voice call, so will have the same quality of service as a normal mobile phone call. The call quality will remain constant over the duration of the call regardless of the number of other mobile phones being used in the area. As a result, they are particularly suitable for reporting in highly-congested mobile phone areas such as football matches or concert venues.
The phones connect to 3G mobile phone services, as well as 2G. When connected to a 3G service offering 'HD voice', they provide a bandwidth of approximately 7 kHz; a substantial increase in audio quality compared to a 2G or PSTN phone. However, in order to take advantage of the increased bandwidth, the call must be received by another 3G phone using 'HD voice'. Glensound 3G phones can be used to connect to PSTN or 2G phones, but in these cases the bandwidth increase is lost.
Glensound also offer 2G mobile phones. These connect to a mobile network and offer an audio bandwidth of approximately 3 kHz. They can make a call to another mobile phone or a PSTN phone number. With PSTN, the audio contribution can be accepted by an existing telephone hybrid, coupler or a phone-in system. Alternatively a Glensound portable or rack-mounting mobile phone can be used to receive the call, either at fixed premises, or on location, say in an outside broadcast vehicle. The 2G models are suitable for areas where 3G 'HD voice' services are simply not available, or it is not possible to have a 3G 'HD voice' phone at both ends of the connection, or simply that the enhanced audio quality is not required, perhaps for a cue feed.
DENON Compact Disc -MP3 Player DN-C635 (Used)
100.00 100.00 100.0 USD
Denon manufactures consumer electronics products including Multi-Room Sound Systems, Home Theater Systems, Hi-Fi Components, Compact Systems and Headphones. Denon is a Japanese electronics company that was involved in the early stages of development of digital audio technology, while specializing in the manufacture of high-fidelity professional and consumer audio equipment. Denon Electronics (USA), LLC designs and manufactures home entertainment products. It offers audio/video (A/V) systems, including A/V receivers, incommand receivers, A/V separates, blu-ray players, streaming media, and multi-room systems; home theater systems; audio components, such as headphones, turntables, CD players, shelf systems, tuners, and amplifiers; accessories, including iPod docks, wireless music systems, cartridges, and tuner cards; and refurbished products. Denon sells its products through a network of dealers, local and national stores, and installers, as well as through its online stores.
Matrix Audio Router (Used)
1,000.00 1,000.00 1000.0 USD
The VS-88A is a high-performance matrix switcher for balanced stereo audio signals. It can route any or all inputs to any or all outputs simultaneously.
S/N Ratio - 84dB unweighted (1Vpp).
Control - Front panel, RS-232 (K-Router Windows-based Kramer software is included), RS-485.
Take Button - Executes multiple switches all at once.
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
Worldwide Power Supply - 100-240V AC.
300.00 300.00 300.0 USD
The analogue HY-03 telephone hybrid is the replacement for the HY-02, which for many years has set the standard as an excellent value, high quality telephone hybrid.

The HY-03 retains many of the features of the HY-02 and adds some additional ones. Some of the features of the HY-03 include :

Fully automatic – adapts to varying line conditions and has automatic signal limiting.
Local and remote line hold switching – calls can be remotely switched through a mixing console.
Momentary or permanent latching remotes can be enabled.
Balanced mic/line input – 10k ohm balanced input selectable for 0dBu clean feed line, or microphone level with adjustable gain.
Balanced output – 0dBu low impedance balanced output, with output gain adjustment.
Mixed output – the output can be a mix of the caller and mic/line input signals for recording both sides of the telephone conversation.
Integrated ring detector – automatic call answering after a pre-determined number of rings.
Fitted with K-break disconnect detection as standard with an option for dial-tone disconnect using the optional HY-03DTD board. The HY-03DTD board can be configured to disconnect on recognizing the dial tone used in a specific country.
Line limiter, bandpass filter and output noise gate with preset threshold providing low distortion crystal clear audio.
28dB typical line balance rejection.
Built in power supply with switchable 115V, or 230V, mains input.
BABT approval compliant with European PTT specifications.
TSL AMP-1 Audio Monitoring Processor (Used)
220.00 220.00 220.0 USD
TSL AMP-1 Audio Monitoring Processor with dual PPM and a selection of XLR in/out plus speaker terminals. Similar unit listed by a dealer for 750 plus VAT used
BlueKeeper Wirless Audio Gateway JK Audio (Used)
0.00 -0.0 USD
JK Audio Daptor 2 (DAP2) Wireless Phone Audio Interface for use with Cell / Cordless Phones
Connect your wireless phone to the Daptor Two using the included 1/4" TRS to 3.5mm TRRS cell phone interface cable. Send and receive voice band audio during regular calls, or full bandwidth audio using third party codec applications. Your device will recognize Daptor Two as a headset which will disable the internal mic and speaker.
You may use either the XLR input or 1/4" input, not both. The XLR input jack is disconnected when a cable is plugged into the 1/4" input jack. The same is true for the XLR and 1/4"output jacks. Simply plug the included 1/4" TRS to 3.5 mm TRRS cell phone interface cable into the Wireless Phone Headset Jack of Daptor Two and into the 3.5 mm TRRS headset jack of any wireless phone or notebook computer that accepts a third party headset or earpiece. Cell phones that do not offer a 3.5mm TRRS headset jack will require an adapter (not provided) that allows the use of a third party 3.5mm TRRS headset
Inputs XLR 600 ohms balanced, line level, 0 dBm max input. 1/4" mono, unbalanced, line level, 0 dBm max input.
Outputs XLR 600 ohms balanced, mic level, -25 dBm avg output. 1/4" mono, unbalanced, mic level, -25 dBm avg output. Passive, no AC or battery power needed.
Size 4.4" x 2.7" x 1.2" (11.2 x 6.9 x 3.5 cm)
ART Cessories CleanBox (Used)
0.00 -0.0 USD
ART Pro Audio CleanBox Two Way Stereo Converter
Adapting from Balanced to Unbalanced and Vice-Versa:
Problem: You have a stereo output from a CD player (tape deck, VCR, computer sound card or other consumer electronics gear) and you need to connect it to the balanced line inputs of your mixer (EQ or other piece of professional audio equipment). Actually, there are three problems: 1.) Your source has RCA connectors and you need to connect to an XLR input. 2.) Your source signal is unbalanced, but you require a balanced signal where you’re plugging into. 3.) The signal levels have to be matched properly.
Solution: Use a CleanBOX! Its RCA-to-XLR channel 1 takes RCA signal, matches the signal levels and then provides a balanced (XLR) output.
Problem: You have the balanced stereo output of a mixer (an EQ or other piece of pro audio gear) and need to connect it to the inputs of a cassette deck, computer sound card, VCR or another type of consumer electronics unit. The three problems above apply here as well (except your source is balanced, and you require an unbalanced audio signal).
Solution: Use a CleanBOX! Its XLR-to-RCA channel 2 takes a XLR balanced signal, matches the signal levels and then provides an unbalanced (RCA) output.
Problem: You want to mix your voice (and/or instrument) with a CD and record the mix on a cassette deck or computer. Now you need to interconnect three pieces of equipment; two consumer level and one balanced pro audio level (the mixer). You have to go from unbalanced RCA to balanced XLR and from balanced XLR back to unbalanced RCA.
Solution: Simply use both channels on your CleanBOX.
M-Audio Fast Track USB mk2 (Used)
0.00 -0.0 USD
Turn your computer into a powerful music production studio with the M-Audio® Fast Track®—the best-selling recording interface in its category. Featuring a simple "plug-and-play" USB connection, Fast Track is the easiest way to record guitar, vocals and more with your PC or Mac. Simply plug in your instruments and you’re ready to rock. Fast Track even offers phantom power so you can use professional-quality studio condenser microphones like the M-Audio Nova®. Fast Track is compatible with most popular music recording applications from GarageBand to studio-standard Pro Tools® M-Powered™*, and includes easy-to-use Pro Tools M-Powered Essential recording and effects software so you can start making music immediately.

* Fast Track is compatible with Pro Tools M-Powered 8 and higher. Pro Tools M-Powered 8 is an expanded version of Pro Tools M-Powered Essential and is a paid upgrade.

Bundled Software
Pro Tools® M-Powered™ Essential gives you easy access to many of the same Pro Tools software features that professionals use every day to create Grammy® award-winning albums, Emmy® award-winning television shows, and Academy Award®-winning films. This easy-to-use software lets you create pro-sounding mixes with up to 16 mono or stereo audio tracks. You also get 60+ virtual instrument sounds to play and record, plus EQ and other effects to make your mixes sound professionally produced. It even comes with over 5.5GB of music-making tools to help you get started instantly.

Studio-Quality Features
Fast Track delivers all the studio-quality features and tools you need to make professional-sounding recordings right out of the box. With clean preamps and 24-bit/48kHz sound quality, you can be sure your instruments and vocals are captured with better-than-CD quality sound. High-gain speaker and headphone outputs further ensure you’ll hear your recordings with the utmost fidelity.

One for All Compatibility
In addition to being compatible with GarageBand, Cubase, Live, Logic, SONAR, Reason and other music production software, Fast Track also works with Pro Tools M-Powered 8*—the same recording platform used in countless professional studios around the world to make award-winning albums and film sound.

Record Your Guitar
Want to record guitar with your computer? How about recording bass or keyboards? Fast Track is the answer. Simply connect it via USB to your PC or Mac, plug your instrument into the convenient 1/4” input and you’re good to go. You can also use the included Pro Tools M-Powered Essential recording software and effects to layer tracks with your instruments and create professional-sounding mixes.

Record Vocals and Acoustic Instruments
Just about every recording interface has a mic input that accepts dynamic (unpowered) microphones—the kind most bands use on stage. Fast Track is one of the few in its price range that also features switchable +48V phantom power—allowing you to connect a studio-grade condenser (powered) microphone like the M-Audio Nova for pro-quality recordings. The Fast Track interface’s 2-input, 2-output design even lets you record a vocal mic and another instrument simultaneously so you can capture song ideas or collaborate with other musicians.

Make Music Immediately
Make music immediately with the included Pro Tools M-Powered Essential—a powerful recording application that enables you to get started creating right away. Based on the same Pro Tools software platform used in pro studios around the world, Pro Tools M-Powered Essential features professional effects like reverb, delay, and more—allowing you to polish your mixes. You also get the Structure® Essential virtual instrument, which offers an easy way add instruments like drums, piano and more to your compositions. Finally, a comprehensive library of included loops helps you construct song ideas quickly and easily.

Direct Monitoring
All digital audio recording systems introduce a small delay between the instrument input and the output coming from the computer. This “latency” can be distracting enough to cause pitch and timing errors when you’re recording. Fast Track solves this latency problem with a direct monitor switch, letting you hear your instruments directly through the interface before they go into the computer.

Next Gen Technology
Fast Track builds on the success of the popular Fast Track USB—one of the products responsible for the personal and mobile studio revolutions. We’ve listened to our users and added some really cool improvements, including a simplified direct monitoring system, top-mounted knobs that provide easier access to important controls, and a more powerful headphone output level. With a sleek, redesigned chassis, the all-new Fast Track looks and performs better than ever.

▪ ASIO 2
▪ Mac OS X Core Audio
Professional Hanle F4 Mixer (Used)
0.00 -0.0 USD
4 channel live Console of USB Interface.
3-band EQ on all channels and one Aux output.
48V phantom power. Main skide control.
Bulit-in digital delay Echo effect processor.
Delay, repeat, effect send & Aux controls.
2 XLR mono input Mic 1/4" jacks and 2 group of stereo input channel.
For Home Audio, Self-made Music, Studio, Concert, Party, Bars, KTV, Meeting, Speech, etc.
Material: Metal
Power Output: AC 17VX2 420mA(not included)
Plug: US(110V)
Item size: 24 * 21 * 4cm / 9.4 * 8.2 * 1.5in
Item weight: 1503g / 53oz
Package size: 33 * 32 * 8cm / 13 * 12.6 * 3in
Package weight: 2416g / 5.3lb

Package List:
1 * Mixing Console
Audio & Video Splitter VSP8 (Used)
0.00 -0.0 USD
The audio and video distributor series products can input the input "VIDEO" and "AUDIO" signals through multi-stage amplifying circuits, and then distribute the multi-channel signal outputs respectively, so that multiple display devices share the same signal and reproduce the image. Clear distribution effect.
Compatible with various brands of VCD, DVD, camcorder, digital TV set-top box and TV signal system, it can play the same clear image signal simultaneously on multiple display devices.
It has strong anti-interference ability and can be cascaded and expanded. The audio and video signals of each port are output independently and do not interfere with each other.

Technical parameters:
Signal type: VIDEO AUDIO
Input port: 1 PORT
Output port: 8 PORTS
Video input: 1Vp-p / 75Ω
Video gain: 0db≤DG≤1db
Audio input: 2.2Vp-p / 20KΩ
Audio gain:-3db≤DG≤0db
Voltage range: AC185V-250V 50/60Hz
Rated power: 6W
Housing: Metal
product size: 245x180x40mm
Ambient temperature:-10°-40°
Teleporter II (Used)
0.00 -0.0 USD
Quantity - 1
Onboard keyboard
Record uit
Line in
Mic in
Puls en DTMF
1x line XLR
1x Record XLR
1x 6.3mm jack Headphones
TANNOY Pasive Loud Speaker
100.00 100.00 100.0 USD
Quantity - Pair

Tannoy Reveal 6 Passive Monitors (Pair) Overview
With the new Reveal models, the cabinets have been further braced and refined to provide the most rigid platform possible for the new driver designs. Securely attached to the solid baffle, with no less than 10 hex socket countersunk-head screws, an all-new bass driver performs with significantly reduced distortion. Magnetic circuit flux control rings and extensive Klippell� based symmetry analysis has made this performance improvement possible and the new driver provides tight, punchy and controlled bass response with a clean and open mid range for superb vocal intelligibility.

From the front:

40mm MDF sculpted baffle � stiff, heavy and rigid and minimises diffraction.

Recessed drive units flush with the baffle surface � minimises diffraction.

New tweeter has wide band design extending the amplitude response beyond 20kHz audibility to 50kHz to correct the phase response from 8kHz to 20kHz within the audible band. This preserves the harmonic structure of sounds and the stability of the stereo image.

Smooth tweeter faceplate contours prevent diffraction and cavity effects.

10 point fixing maximises contact between drive unit and baffle.

New design bass units have aluminium flux control rings around the voice coils and copper caps on the pole pieces � linearises the voice coil motional impedance to reduce non linear (3rd order) distortion products caused by varying voice coil inductance. (Except R5A).

Bass unit development using Klippell� analysis equipment to minimise offsets and linearise the suspension components.

From the side:

18mm MDF cabinet construction provides stiffness and minimises colouration.

Internal construction braces the sides and rear of the cabinet against the rear of the bass driver to provide a rigid reactive mass for the moving cone assembly. Ensures fast tight bass response and clear midrange.

Front baffle and rear panel tongued and grooved into the cabinet as a mechanical interlock for safety if wall mounted.
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.

Recently viewed Products

MediaMark Online Store  we provide new and used high end technology.
Please contact us for more information if you require Enterprise and Broadcast technology products for your project.