BW BROADCAST TX1000 V2 FM TRANSMITTER

    0.00 0.00 -0.0 USD

    0.00

    This combination does not exist.

    Add to Cart

    Quantity - 1
    At only 2 RU and about as deep as it is wide, the TX1000 V2 breaks all the rules on 1 kW transmitter size. The compact form factor is only one of the reasons this advanced FM transmitter is perfect for your station, it also combines high performance and superb value for those who can’t afford to buy anything but the best. Now with built in 4-band DSPX audio processing, Ethernet control and FSK IDer.

    Radio ‘Pick Hit’ winning V2 FM Transmitters are packed with features to improve sound quality & reliability.

    The TX1000 V2 has integrated multi-band DSPX audio processing that means stations without a dedicated processor sound great, right out of the box. It also has one of the industry’s cleanest exciters and an ultra-low distortion modulator which go to make it a highly stable FM transmission system. Clean, loud, market leading audio performance that will crush the competition.

    With Gold Clamp Transistors and Slide-in Power Supplies on-site repairs have never been simpler. So, should your transmitter fall foul of lightning strikes or power fluctuations, parts can be changed in a couple of minutes and you’re back on air! Slide-in universal power supplies make replacement a breeze. A truly innovative heatsink design ensures ultra-long life, thanks to ingenious airflow.

    We’ve made our transmitters the most intelligent on the market by adding Remote Control, Email Alerts, Silence Detection, Advanced Alarms as well as an In-built Logger. All of these features make it easy for you to monitor the status of your transmitter. It will email you if it has a problem and keep a log of any issues to be investigated. You can also adjust settings remotely if required. All these features are designed to give you peace of mind and save you time.

    Configurable Status and Alarm Ports, to signal to, and control external equipment. This will alert you to issues and offer solutions to keep you on air. For example, it can be configured to switch on back-up audio or back-up transmitters should it detect a problem.

    Analogue, Digital and Composite Inputs give maximum flexibility to interface with any existing and future audio chains, alleviating compatibility problems and future proofing your equipment.

    FSK ID Keyer as standard for translators removes the need for external hardware or hourly audible announcements and offers broadcasters a one-box solution for their translator sites.

    Flexible and extensive Web Mail, SNMP, Telnet and Serial Remote Control that will keep you aware and in control of your station’s transmission, and allow you to interact with your transmitter using the method that you prefer.

    ONLY SUITABLE FOR 220V OPERATION

    RF
    Harmonics better than -75 dBc
    Spurious <-90dBc
    Frequency range 87.5 – 108 MHz
    Frequency steps 50 kHz
    Frequency selection User interface with display or web remote control
    Frequency control type Dual speed phase locked loop
    Frequency stability <+/- 500 Hz (fine adjustment available)
    Modulation Direct frequency modulation
    Synchronous AM Noise >70dB
    Asynchronous AM Noise >70dB

    AUDIO AND MPX I/O
    MPX input connector BNC
    MPX input level MPX input level -10 dB to +10 dB (adjustable)
    MPX input response MPX input response +/- 0.02 dB, 5 Hz to 100 kHz
    Audio input connectors XLR balanced
    Analog Input impedance 10 kOhm
    AES/EBU Sampling Rates 32kHz, 44.1kHz, 48kHz, 88.2kHz and 96kHz

    STEREO
    Subcarrier generation Microprocessor generated 8x over-sampled
    Pilot 19 kHz +/- 1 Hz (adjustable)
    Pilot generation Microprocessor generated 16x over-sampled
    Output level +6dBu (BNC)
    15 kHz filtering >= 80dB at 19kHz (DSP based)
    Overshoot filter clipping DSP based
    Spurious
    >80 kHz > -60dBr
    >160 kHz > -80dBr
    Stereo separation >50dB (20Hz – 15kHz)

    LIMITER
    Audio input levels -10dB to +24dB for level control, DSP auto levelling
    Input CMRR > 60dB
    Audio distortion <0.05% at limiting 1 KHz (bypass preset)
    Frequency response 20 Hz to 20 kHz +/- 0.2dB (pre-emphasis off)
    Processing range Processing control range 40dB
    Pre-emphasis 50 μs,75 μs and 0 μs (off)
    Processing type Multiband DSP Processor. DSPXmini FMSE
    Process modes Multiple presets

    OTHER
    User Interface 3 buttons, rotary encoder and 256×64 graphics display
    External control/monitor I/O Alarms D9-type Male; RS232 D9-Type Female,
    Telnet and Web remote RJ45 Ethernet
    10.1.6 Temperature Protection
    The temperature protection circuitry will protect the unit against over-temperature conditions
    by reducing the output power. The reduction will start at 71 °C. At 81 °C, the power will
    be reduced to 50% and at 85 °C to around 6%.
    10.1.7 VSWR Protection
    The VSWR protection circuitry will protect the unit against high VSWR conditions by reducing
    the output power. This protection will reduce the output power to 50% when the reverse
    power is 10% of the forward power.


    • Used products are marked (Used)
    • New products can be ordered based on agreements
    • No Return Policy, Cash on Delivery, Contact us for Discount

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products